Transparency Using Innovative Structural, Conventional and Walkway Glazing
Structural Glazing, Conventional Glazing and Walkable Glass
Novum utilizes six glazing products to satisfy the varied aesthetics, complexities and functional demands of architectural glazing applications. The systems are developed for use with all glass types (monolithic, laminated and insulating) and are typically weather sealed using silicone and silicone gaskets. Novum has an industry leading approach to the optimization and integration of glass and structure.
Our comprehensive systems divide into three categories:
Structural Glazing. PSG + ECG + CCG Systems. The discreet fixing points allow for increased transparency, taking advantage the glass strength properties to work as structural panels, as opposed to more conventional, less engineered metal intense systems. Structural glazing eliminates much of the visual clutter of secondary materials and allows expressive or minimal primary structure.
Novum’s family of three glazing systems use mechanical fixing of the glass to substructure via bolting or clamping. Point fittings, edge clamps and corner clamps work in both horizontal and vertical orientations with point supported glass being the most appropriate for suspended glazing.
Conventional Glazing. ASG + LSG Systems. Both systems function on the premise that at least two sides of the glass are supported. Linear supported glazing (LSG-System) was developed to integrate directly to steel structural framing, and as such, is lightweight and of minimal depth. Aluminum supported glazing (ASG-System) uses structural aluminum profiles in a more conventional manner spanning between primary steel. Both systems can be flush glazed or capped depending on architecture.
Walkable Glass. WSG-System. High standards of engineering are employed for the use of laminated glass as stair treads, bridges and walkways. Our systems are designed to provide safety and translucency with minimal shadowing. Surfaces vary depending on wear and slip requirements.
Point Supported Glass. This system is historically our customers’ most popular choice and our most versatile structural glazing system. Rotational point supports are optimally located by our engineers to maximise glass size, optimise glass structural performance and minimise structure. Extra-large panel sizes and cantilevered free glass edges are readily achieved. Standardised and tested A316L stainless-steel fixing bolts for glass of all thicknesses and buildups are typically available from our warehouses. They can be countersunk flush or button type with the head above the glass surface. Glass can be oriented in any plane. Hence, the system is ideal where overhead glass is to be suspended below structure.
The fixing bolts fasten to a choice of cast or plate spider styles. Novum has a wide range of readily available spider designs as well as the capability to custom cast or fabricate. Our product line was developed so that spiders can weld or mechanically fasten to all six of our structural products or clamp to cables. Spider finishes can be brushed, polished or bead blasted stainless steel to plated and painted or powder coated mild steel.
Applications are unlimited – walls, roofs, canopies, sculptures, handrails, glass fins and more. The PSG-System provides the ability to generate high transparency with minimal support design and has been hugely instrumental in the development of highly technical facades. Novum’s fully tested system has been successful in hundreds of projects including in high snow, seismic and hurricane zones.
Edge Clamped Glass. Arguably Novum’s most simple, yet easily adjustable structural glazing system can be implemented fully flush glazed or with small economical exposed caps. The glass is mechanically clamped at discreet points along its edges, as required to meet strength and deflection needs, and typically requires no notching or drilling. Panels can be oriented vertically, sloped or overhead and can be of almost any shape. The clamp readily accommodates any changes in surface angle of the two adjoining pieces of glass it is supporting and has the capability to accommodate transverse dead loads.
The clamp material is comprised of high-grade aluminium and stainless-steel components with silicone bearing pads. It is versatile to either laminated or insulating glass and has even been adapted for use in hurricane zones. The system can also be realised with continuous caps which still allow free flow of air on the interior surface of the glass, reducing maintenance difficulties and potential condensation.
Weatherproof glass joints are comprised of extruded silicone gaskets and wet silicone and have been used extensively and successfully for decades.
Applications include facades, canopies, domes, vaults, freeform surfaces and more.
Corner Clamped Glass. This structural glazing system supports glass panels at their corners. The clamps are stainless steel or aluminium depending on application and strength requirements. As with all our glazing systems, Novum fully designs the panels and fittings and the crucial integration with support structure to accommodate all movements and loads. The minimal corner support maximises individual panel transparency, but structurally means that glass panel sizes are limited to prevent prohibitively heavy makeups. The system requires the clamp be external to the outer glass surface.
Applications include facades where the clamp is designed to take both dead loads and wind loads. Glass panels are typically rectangular and the facade might be a cable wall, suspended girt or architectural steelwork. The system is very efficient where a squarer panel geometry is required or when making a segmented curve in plan with smaller panels.
Linear Supported Glass. This system is typically used where a demand for close coupled glass to structure occurs or when code or client requires a secondary back up to the silicone glass joint. An elegant continuous support is achieved. The system is comprised of aluminium and silicone profiles with stainless-steel fasteners mechanically connecting the profiles to substructure. The profiles can be slightly elevated from or flush to the supporting structure. The elevated method reduces the need for tight structural tolerances on the steel, simplifies angle changes at connections and improves air flow to reduce condensation traps. Hence, is functionally better and easier to maintain. The external glazing face can be flush or with caps. The system is designed to function on planar, and even freeform surfaces, and functions at all inclinations from vertical to horizontal.
Applications are typically in facades, sloped or overhead glazing. This system is more field labor and material intense than the ECG-System to achieve a different look with added function.
Walkway Surface Glass. Special translucent glass is structurally engineered to support all live and people loads. For safety, slip design is especially important as is structural redundancy which is provided by three layers of glass, so that if one layer cracks, the application remains safe temporarily. Translucency plays an important factor in the design, primarily for privacy, but also for exciting lighting effects that can be achieved by surface treatments of the panel or in the interlayers.
To resolve wear and slip resistance considerations, the slip surface can be etched, fritted or cast depending on client choice, preference and any local code needs. The triple laminated walkway glass is held by gaskets and/or fittings. Typically, the glass is supported by our AES-System and used indoors. Stair treads are single panels and normally support only at their ends.
Applications for this system include pedestrian walkways, bridges and staircases.
Aluminium Supported Glass. While Novum is better known for its extensive use of structural glazing, applications can occur where the more conventional glass as a cladding with aluminium profile support is technically suited or architecturally desirable.
Aluminium profiles are extruded hollow sections and sized to meet load criteria with spans typically under 16’ (5m) These profiles are typically anodized, but for higher surface protection, they can be powder coated.
The system can be provided with or without external caps and can be used vertically or inclined. Four-sided support glass is normal, but two-sided is possible with typical panels being trapezoidal or rectangular. Entrances and vestibules are well suited to the system and a large range of door products are available.
Applications include entryways, storefront, pitched skylights, larger grid spacetrusses and rectilinear planar applications.